2025
Literaturliste
a) Arbeiten, die in Publikationsorganen mit einer wissenschaftlichen Qualitätssicherung erschienen sind
- Image-based semantic recognition ans segmentation of concrete damages for assessment of existing concrete structures.
Kaufmann, F.; Lu, C; Schellen, M.; Glock, C.
2025 European Conference on Computing in Construction - Rebar-to-BIM: steel reinforcement reconstruction for extended scan-to-BIM workflows
Kaufmann, F.; Schellen, M.; Glock, C.; Hoeh, E.
2025 European Conference on Computing in Construction - Design, construction and qualification of a lightweight, modular heliostat made from high-performance concrete.
Forman, P.; Schellen, M.; Schlichting, T.; Pfahl, A.; Mark, P.; Glock, C.; Schnell, J.
Solar Energy, Volume 285, 2025, 113093, ISSN 0038-092X
https://doi.org/10.26127/BTUOpen-6689 - Empirische Untersuchung zum politischen Verständnis über graue Emissionen im Bauwesen - Bundestagsabgeordnete im Dialog
Glock, C.; Dernbach, A.: Kaufmann, F.; Johann, Y.
Bautechnik 102 (2025), Heft 1, 2025, Berlin: Ernst & Sohn, 2025. S. 10-19.
https://doi.org/10.1002/bate.202400069 - Die neue DAfStb-Richtlinie im Bauwesen - Treibhausgasreduzierte Tragwerke aus Beton, Stahlbeton oder Spannbeton - Meilenstein für den Klimaschutz
Haist, M.; Glock, C.; Wiens, U.; Schack, T.; Heckmann, M.
Beton- und Stahlbetonbau 120 (2025), Heft 1, 2025, Berlin: Ernst & Sohn, 2025. S. 55-59
https://doi.org/10.1002/best.202400090 - Graue Emissionen von Hochbaudeckensystemen - Praxisumfrage und Hintergründe zur neuen DAfStb-Richtlinie
Heckmann, M.; Glock, C.;
Beton- und Stahlbetonbau 120 (2025), Heft 1, 2025, Berlin: Ernst & Sohn, 2025. S. 22-32
https://doi.org/10.1002/best.202400076 - Innovativer Betonbau - Tradition und Zukunft
Hegger, J.; Glock, C.; Curbach, M.; Fischer, O.; Haist, M.; Leutbecher, T.; Mark, P.; Scheerer, S.; Forman, P.; Sanio, D.; Müller, R.; Sinning, A.; Schmidt, C.
Bauingenieur Jahrgang 100 (2025), Heft 7-8, Düsseldorf: VDI-Fachmedien, 2025. S. 181 - 195
https://elibrary.vdi-verlag.de/de/10.37544/0005-6650-2025-07-08/bauingenieur-jahrgang-100-2025-heft-07-08 - Marktdurchdringung von Drohnen und Herausforderungen beim Einsatz im Bauwesen
Tschickardt, T.; Swoboda, A.; Glock, C.; Schmitt, J.
Bautechnik 102 (2025), Heft 4, 2025, Berlin: Ernst & Sohn, 2025. S. 215 - 223
https://doi.org/10.1002/best.202400090
b) Andere Veröffentlichungen
- Reuse instead of recycling: Reuse of prestressed concrete hollow-core floor slabs.
Müller, R.; Dernbach, A.; Wagner, E.; Glock, C.
BFT International (2025), Heft 3, 2025, Gütersloh: Bauverlag GmbH 2025 - Climate-friendly concrete construction using standardized benchmarks - The GHG guideline published by the DAfSTb.
Haist, M.; Glock, C.; Wiens, U.
BFT International (2025), Heft 3, 2025, Gütersloh: Bauverlag GmbH, 2025 - Re-Use statt Re-Cycling: Wiederverwendung von Deckenplatten am Beispiel Spannbetonhohldielen.
Müller, R.; Dernbach, A.; Wagner, E.; Glock, C.
BFT International (2025), Heft 3, 2025, Gütersloh: Bauverlag GmbH 2025 - Klimaschonender Betonbau mit genormten Benchmarks - Die THG-Richtline des DAfSTb.
Haist, M.; Glock, C.; Wiens, U.
BFT International (2025), Heft 3, 2025, Gütersloh: Bauverlag GmbH, 2025
2024
Literaturliste
a) Arbeiten, die in Publikationsorganen mit einer wissenschaftlichen Qualitätssicherung erschienen sind
- Experimentelle Untersuchungen zu Rückbau und Wiederverwendung von Spannbetonhohldielen.
Heckmann, M; Dernbach, A.; Müller, R.; Glock, C.
Beton- und Stahlbetonbau 119 (2024), Heft 6, 2024, Berlin; Ernst&Sohn, 2024. S.410-419
https://doi.org/10.1002/best.202400001 - Klima- und ressourcenschonendes Bauen mit Beton - mit Urban Mining zum kreislauffähigen Betonbau.
Glock, C.; Haist, M.; Bergmeister, K.; Voit, K.; Beyer, D.: Heckmann, M; Hondl, T.; Hron, J.; Kaufmann, F.; Pürgstaller, A.; Schack, T.;
Beton-Kalender 2024: Hochbau; Digitales Planen und Baurobotik. Herausgeber Bergmeister, K.; Fingerloos, F.; Wörner, Johann-Dietrich, Berlin: Ernst & Sohn, 2024. S. 177-266
doi.org/10.1002/9783433611494.ch2 - "Treibhausgasreduzierte Tragwerke aus Beton, Stahlbeton oder Spannbeton" – die neue DAfStb-Richtlinie.
Glock, C., Haist, M.; Wiens, U.; Heckmann, M.; Schack, T.
Bauingenieur Jahrgang 99 (2024), Heft 11, Düsseldorf: VDI Fachmedien, 2024. S.339-347https://elibrary.vdi-verlag.de/10.37544/0005-6650-2024-11/bauingenieur-jahrgang-99-2024-heft-11?page=1 - Segmentation of spatial crack structures in concrete by deep learning enabling image based characterization.
Nowacka, Anna; Schladitz Katja; Grzesiak, Szymon; Pahn, Matthias
Journal of Soft Computing in Civil engineering
DOI: 10.22115/SCCE.2024.414873.1712
https://www.jsoftcivil.com/article_199726.html
b) Andere Veröffentlichungen
- Fire behaviour of timber-concrete composite constructions under fire exposure.
Peifer, P.; Thiele, C.
Proceedings of the 13th International Conference on Structures in Fire SIF’24, S. 213-224;(2024). - Ohne BIM keine Reduzierung von Treibhausgasemissionen.
Glock, C., Paetzold, T.; Tschickardt, T.;
nbau Nachhaltiges Bauen 3, Heft 1,2024. S.20-22 - Reversible, kreislauffähige Holz-Beton-Verbunddecke.
Glock, C., Müller, R.;
BFT International (2024), Heft 5, 2024, Gütersloh: Bauverlag GmbH, 2024 - Gelbdruck der DAfStb-Richtlinie ‚‘Treibhausgasreduzierte Tragwerke aus Beton, Stahlbeton oder Spannbeton.
Glock, C., Haist, M.; Wiens, U.; Schack, T.; Heckmann, M.
BFT International (2024), Heft 5, 2024, Gütersloh: Bauverlag GmbH, 2024 - “Treibhausgasreduzierte Tragwerke aus Beton, Stahlbeton oder Spannbeton“ – die neue DAfSt-Richtlinie.
Glock, C., Haist, M.; Wiens, U.; Schack, T.; Heckmann, M.
Konferenzband 11. Betonfachtagung Hannover 20.-21.11.2024, Sehnde: Informationszentrum Beton, 2024. S.27-41 (Zweitdruck aus Bauingenieur 11/2024) - Possibilities for numerical model validation through computed tomography generated data.
Pahn, Matthias; deSousa, Christoph; Gzesiak, Szymon; Liebold, Frank; Giese, Josian; Curbach, Manfred; Beckmann, Birgit
Structural Mechanics, Dynamics and Engineering, 2024
DOI: 10.23967/wccm.2024.091
https://www.scipedia.com/puvlic/Pahn_et_al_2024a - Implementation of computed tomography for damage analysis in structural engineering.
Grzesiak, Szymon; deSousa, Christoph; Pahn, Matthias
Procedia Structural Integrity
https://doi.org/10.1016/j.prostr.2024.09.245
https://sciencedirect.com/science/article/pii/S2452321624008400
2023
Literaturliste
a) Arbeiten, die in Publikationsorganen mit einer wissenschaftlichen Qualitätssicherung erschienen sind
- Annotation rules and classes for semantic segmentation of point clouds for digitalization of existing bridge structures.
Schellen, M.; Kaufmann, F.; Glock, C.; Tschickardt, T.
2023 European Conference on Computing in Construction and the 40th International CIB W78 Conference, DOI: 10.35490/EC3.2023.228. - Initiation of data acquisition based on 4D-BIM for lean construction progress control.
Tschickardt, T.; Oerter, N.; Glock, C.; Kaufmann, F.; Schellen, M.
2023 European Conference on Computing in Construction and the 40th International CIB W78 Conference, DOI: 10.35490/EC3.2023.215 - Ontology-based semantic labeling for RGB-D and point cloud datasets.
Kaufmann, F.; Chamseddine, M.; Guttikonda, S.; Glock, C.; Stricker, D.; Rambach, J.
2023 European Conference on Computing in Construction and the 40th International CIB W78 Conference, DOI: 10.35490/EC3.2023.241 - Experimental and analytical evaluation of externally bonded BFRP and CFRP strips on the load-bearing behaviour of einforced concrete structures using distributed fibre optic sensing.
Grzesiak, Szymon; Schultz-Cornelius, Milan; Pahn, Matthias
Construction and Building Materials, Volume 400 (2023), DOI: 10.1016/j.conbuildmat.2023.132452, www.sciencedirct.com/science/article/abs/pii/SO950061823021682 - Analysis oft he bond behavior of a GFRP rebar in concrete by in-situ 3D imaging test.
Grzesiak, Szymon; Barisin, Tin; Schladitz, Katja; Pahn, Matthias
Material and Structures 56, Heft Nr. 9, S. 163. DOI: 10.1617/s11527-023-02247-0, link.springer.com/article/10.1617/s11527-023-02247-0 - Investigation oft he Crack Behavior of CRC Using 4D Computed Tomography, Photogrammetry and Fiber Optic Sensing.
Giese, Josiane; Herbers, Max; Liebold, Frank; Wagner, Franz; Grzesiak, Szymon; deSousa, Christoph; Pahn, Matthias et al.
Buildings 13, Heft Nr. 10, 2595, DOI: 10.3390/buildings13102595, www.mdpi.com/2075-5309/13/10/2595 - Damage Analysis and Quality Control of Carbon-Reinforced Concrete Beams on In-Situ Computed Tomography Tests.
Liebold, Frank; Wagner, Franz; Giese, Josiane; Grzesiak, Szymon; deSousa, Christoph; Beckmann, Birgit et al.
Buildings 13, Heft Nr. 10, 2669, DOI: 10.3390/buildings13102669, https://mdpi.com/2075-5309/13/10/2669 - Anwendungsfallbezogene Nutzwertanalyse für Erfassungstechnologien im Brückenbau.
Tschickardt, T.; Lermen, H.; Glock, C.
Bautechnik 100 (2023), Heft 11, 2023, Berlin: Ernst & Sohn, 2023. S.659-666 doi.org/10.1002/bate.202300063 - Ökobilanz im Bauwesen – Treibhausgasemissionen praxisüblicher Deckensysteme.
Heckmann, M.; Glock, C.
Beton- und Stahlbetonbau 118 (2023), Heft 2, 2023, Berlin: Ernst&Sohn, 2023. S. 110-123 onlinelibrary.wiley.com/doi/abs/10.1002/best.202200102 - Kombinierte Betrachtung von Fahrbahnqualität – LKW-Achslasten und der Lebensdauer von Betonbrücken.
Hondl, T.; Glock, C.
Beton- und Stahlbetonbau 118 (2023), Heft 1, 2023, Berlin: Ernst & Sohn, 2023, S.1-9 doi.org/10.1002/best.202200090 - Treibhausgas- und ressourcenreduzierter (Beton)Bau – Herausforderungen, Lösungsansätze, Anreizsysteme.
Glock, C., Dernbach, A.; Heckmann, M.; Hondl, T.; Kaufmann, F.; Schellen, M.
DBV-Heft 50, Band 1, Nachhaltiges Bauen mit Beton – Graue Emissionen und Lösungsansätze zum Klimaschutz, Deutscher Beton- und Bautechnik-Verein E.V., Berlin: DBV, 2023, S.24-63
b) Andere Veröffentlichungen
- ReBuild - Wiederverwendung ganzer Stahlbetonbauteile.
Glock, C.; Dernbach, A.
BFT International (2023), Heft 2, 2023, Gütersloh: Bauverlag GmbH, 2023 - Application of the computed Tomography in Structural Engineering.
Grzesiak, Szymon; Pahn, Matthias; Basters, René, deSousa; Christoph
Building fort he Future: Durable, Sustainable, Resilient; DOI: 10.58286/27221, link.springer.com/chapter/10.1007/978-3-031-32519-9_191 - 3D imaging and analysis of cracks in loaded concrete samples.
Jung, Christian; Nowacka, Anna; Barisin, Tin; Meinel, Dietmar; Paetsch, Olaf; Grzesiak, Szymon; Salamon, Michael; Schladitz, Katja; Redenbach, Claudia; Pahn, Matthias
Special Issue of e-Journal of Nondestructive Testing (eJNDT) 3d imaging and analysis of cracks in loaded concrete samples
2022
Literaturliste
a) Arbeiten, die in Publikationsorganen mit einer wissenschaftlichen Qualitätssicherung erschienen sind
- Drone-based acquisition of as-built models for the automation of processes within the digital management of bridge assets.
Kaufmann, F.; Tschickardt, T.; Glock, C.
International Symposium on Reliability Engineering and Risk Management ISRERM, 04.-07.09.2022, Hannover, 2022. S. 91-98 - Scale-BIM: Introducing a scalable modular framework to transfer point clouds into semantically rich Building Information Models.
Kaufmann, F.; Glock, C.; Tschickardt, T.;
EC3 – European Conference on Computing in Construction, 24.-26.07.2022, Ixia, Rhodes, Greece, 2022. Best Paper Award - Lean and BIM-based flight planning for automated data acquisition of bridge structures with lidar UAV during construction phase.
Tschickardt, T.; Kaufmann, F.; Glock, C.
Structural Concrete, 2022. S. 822-835. - Characteristic concrete compressive strength of existing structures-Evaluation of EN 13791:2019 for small sample sizes.
Sefrin, R.; Glock, C.
Bautechnik 100 (2023), Heft 11, 2023, Berlin: Ernst & Sohn, 2023. S.659-666 doi.org/10.1002/suco.202100207 - Fertigteile aus Recyclingbeton – Ergebnisse des Forschungsprojektes SeRaMCo.
Glock, C.; Hondl, T.
Bauingenieur Jahrgang 97 (2022), Heft 07-08, Düsseldorf: VDI Fachmedien, 2022. S. 215-226 - Massivbau in Zeiten von Klimawandel und Ressourcenverknappung – Herausforderungen und Lösungsansätze.
Glock, C.; Heckmann, M.; Hondl, T.; Kaufmann, F.; Schellen, M.; Sefrin, R.
Bauingenieur Jahrgang 97 (2022), Heft 1, Düsseldorf: VDI Fachmedien, 2022. S.1-12 - Mechanical and Thermal Properties of Basalt Fibre Reinforced Polymer Lamellas for Renovation of Concrete Structures.
Grzesiak, Szymon; Pahn, Matthias; Klingler, Andreas; Akpan, Emmanuel Isaac; Schult-Cornelius, Milan; Wetzel Bernd
Polymers 14 (4), DOI: 10.3390/polym14040790, www.mdpi.com/2073-4360/14/4/790 - Experimental Investigation of Concrete Sandwich Walls with Glass-Fiber-Composite Connectors Exposed to Fire and Mechanical Loading.
Haffke, Marcin; Pahn, Matthias; Thiele, Catherina; Grzesiak, Szymon
Applied Sciences 12 (8), S. 3872, DOI: 10.3390/app12083872
https://www.mdpi.com/2076-3417/12/8/3872
b) Andere Veröffentlichungen
- Modular, Präzise und leicht: Heliostate aus UHPC für punktfokussierende Solarkraftwerke.
Formann, P.; Schellen, M.; Mark, P.; Glock, C.; Schnell, J.
Festschrift zum 70. Geburtstag von Prof. Dr.-Ing. Manfred Keuser, Universität der Bundeswehr München – Berichte aus dem Konstruktiven Ingenieurbau, München: Berichte aus dem Konstruktiven Ingenieurbau, 2022. ISSN 1431-5122, S. 157-164 - Einfluss der Fahrbahnqualität auf die Lebensdauer von Straßenbrücken aus Stahlbeton –Simulationen mit realitätsnahen LKW-Achslasten.
Hondl, T.; Glock, C.
Innsbrucker Bautage 2022 – Festschrift zum 60. Geburtstag von Univ.-Prof. Dr.-Ing. Jürgen Feix, Innsbruck – Massivbau und Brückenbau Band 7, Herausgeber; Johannes Berger, Innsbruck: Studia Universitätsverlag, 2022. ISBN 978-3-99105-024-7, S. 145-157 - Untersuchung zum Einfluss der Fahrbahnqualität auf die Lebensdauer von Brückentragwerken aus Stahlbeton.
Hondl, T.; Glock, C.;
Konferenzband TAE Konferenz 05.-07.09.2022, 5. Brückenkolloquium, Esslingen: Technische Akademie Esslingen e.V., expert Verlag GmbH, 2022. ISBN 978-3-8169-3549-0 (Print), S. 505-510 - Ereignisbasierte und bedarfsorientierte Datenerfassung für die 4D-BIM-Basierte Flugplanung von Drohnen.
Tschickardt, T.; Kaufmann, F.; Glock, C.;
Konferenzband TAE Konferenz 05.-07.09.2022, 5. Brückenkolloquium, Esslingen: Technische Akademie Esslingen e.V., expert Verlag GmbH, 2022. ISBN 978-3-8169-3549-0 (Print), S. 147-154 - Drohnengestützte Erfassung von Bestandsmodellen zur Automatisierung von Prozessen des digitalen Managements von Brückenbauwerken.
Kaufmann, F.; Tschickardt, T.; Glock, C.;
Konferenzband TAE Konferenz 05.-07.09.2022, 5. Brückenkolloquium, Esslingen: Technische Akademie Esslingen e.V., expert Verlag GmbH, 2022. ISBN 978-3-8169-3549-0 (Print), S. 155-162 - Erfolgspotenziale der Holzhybridbauweise in der Immobilienprojektentwicklung.
Wagner, B.; Heckmann, M.; Pfnür, A.; Glock, C.
Wiesbaden: Springer Vieweg, 2022 - Erfolgspotenziale der Holzhybridbauweise in der Projektentwicklung.
Wagner, B.; Heckmann, M.; Pfnür, A.; Glock, C.
Kurzfassung Ergebnisbericht, Januar 2022, Darmstadt: Technische Universität Darmstadt, Technische Universität Kaiserslautern, OFB Projektentwicklung GmbH 2022
2021
Literaturliste
a) Arbeiten, die in Publikationsorganen mit einer wissenschaftlichen Qualitätssicherung erschienen sind
- Efficient and Comprehensive Time-Dependent Reliability Analysis of Complex Structures by a Parameter State Model.
Blandfort, F.; Glock, C.; Sass, J.; Schwaar, S.; Sefrin, R.
ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering, 7(2), 04021020, 2021. - Schnelles Bauen – Motivation, Historie und Konzepte.
Forman, P.; Glock, C.; Mark, P.
Beton- und Stahlbetonbau 116 (2021), Sonderheft 2, 2021, Berlin: Ernst & Sohn, 2021. S. 2 – 11
doi.org/10.1002/best.202100064 - Digitaler Betonbau durch additive Verfahren – Sachstand und Forschungsbedarf.
Mechterine, V.; Dreßler, I.; Empelmann, M.; Gehlen, C.; Glock, C.; Kuhn, A.; Lanwer, J.P.; Lowke, D.; Müller, S.; Neef, T.; Nerella, V.; Stephan, D.; Vasilic, K.; Weger, D.; Wiens, U.
Beton- und Stahlbetonbau (2021), Heft 11, 2021, Berlin: Ernst & Sohn, 2021. S. 881 – 900. doi.org/10.1002/best.202100067 - Ermittlung der charakteristischen Betondruckfestigkeit von Bestandstragwerken nach DIN EN 13791: 2020 für geringe Stichprobenumfänge.
Sefrin, R.; Glock, C.; Schwabach, E.
Beton- und Stahlbetonbau 116 (2021), Heft 1, 2021, Berlin: Ernst & Sohn, 2021. S. 35 – 44
https://doi.org/10.1002/best.202000041
b) Andere Veröffentlichungen
- Concrete components made from R-concrete – Application examples and production of SeRaMCo products.
Glock, C.; Hobdl, T.;
BFT International (2021), Heft 2, 2021, Gütersloh: Bauverlag GmbH, 2021, S. 56. - Ready for BIM – Digitizing capturing and assessment of existing structures.
Kaufmann, F.; Glock, C.
BFT International (2021), Heft 2, 2021, Gütersloh: Bauverlag GmbH, 2021, S. 63. - Cracking behaviour of reinforced concrete-elements with multiple-layer reinforced cross sections when using large diameters.
Breit, F.; Glock, C.
Beton- und Stahlbetonbau (2021), Heft 2, 2021, Gütersloh: Bauverlag GmbH, 2021, S. 94. - Determination Of In-Situ Concrete Compressive Strenght under Consideration of Rearrangement Effects.
Sefrin, R.; Glock, C.;
FiB-Conference Prag 2021, ICCS20-21, 2021, Prag: fib, 2021. - Kreislaufwirtschaft im Betonfertigteilbau.
Glock, C.; Hondl, T.
DBZ Deutsche BauZeitschrift 07/08 2021, Gütersloh: Bauverlag BV HmbH, 2021, S. 52 – 55. - Abbruchreste von heute sind die Rohstoffe von morgen – Tragende Fertigteile aus Recyclingbeton für Pilotprojekte in Thionville und Pirmasens.
Glock, C.; Hondl, T.; Kranzler, T.; Noll, T.
BDB Landesnachrichten Rheinland-Pfalz/Saarland, Heft 2, 2021, Altötting: Gebr. Geiselberger Mediengesellschaft GmbH, 2021S. 25 – 28. - Drohnenbasierte Erfassung von as-built Modellen zur Automatisierung von Prozessen des digitalen Planens und Bauens im Brückenbau.
Glock, C., Kaufmann, F.; Tschickardt, T.
Konferenzband TAE Konferenz 29. – 30.06.2021, 1. Fachkongress Digitale Transformation im Lebenszyklus der Verkehrsinfrastruktur, herausgegeben von Dir. Prof. Dr.-Ing. Jürgen Krieger, Esslingen: Technische Akademie Esslingen e.V., expert verlag GmbH, 2021. - Betonbauteile aus R-Beton – Anwendungsbeispiele und Herstellung der SeRaMCo-Produkte.
Glock, C.; Hondl, T.
BFT International (2021), Heft 2, 2021, Gütersloh: Bauverlag GmbH, 2021, S. 56. - Ready for BIM – Digitalisierung der Erfassung und Beurteilung von Bestandsbauwerken.
Kaufmann, F.; Glock, C.
BFT International (2021), Heft 2, 2021, Gütersloh: Bauverlag GmbH, 2021, S. 63. - Rissverhalten von Stahlbetonbauteilen mit mehrlagig bewehrten Querschnitten bei Verwendung großer Stabdurchmesser.
Breit, F.; Glock, C.
BFT International (2021), Heft 2, 2021, Gütersloh: Bauverlag GmbH, 2021, S. 94.
2020
Literaturliste
a) Arbeiten, die in Publikationsorganen mit einer wissenschaftlichen Qualitätssicherung erschienen sind
- Smart Engineering: Innovative moisture measurement of screed by didital sensors.
Penkert, S.; Glock, C.
Civil Engineering Design 2020, Berlin: Ernst & Sohn, 2020, S. 1 - 11.
https://doi.org/10.1002/cend.202000002
b) Andere Veröffentlichungen
- Lautern Barrier - Innovative Self-Closing Flood Protection System from UHPFRC.
Maryamh, K.; Glock, C.
BFT International (2020), Heft 12, 2020, Gütersloh: Bauverlag GmbH, 2020, S. 42 - 51. - Precast Concrete in the Circular Economy.
Glock, C.; Hondl, T.; Däuwel, D.
Proceedings Final Conference of SeRaMCo - Secondary Raw Materials for Concrete Precast Products, 25. - 26.03.2020, University of Technology Kaiserslautern, 2020. - Simplification of the procedure for determining the fire resistance of heat-insulting brick masonry.
Kruse, H.; Thiele, C.; Glock, C.
Proceeding of the 13th fib Interntional PhD Symposium in Cicil Engineering, Paris: fib, 2020, S. 224 - 229. - New methods according to E DIN EN 13791:2018 - In-situ-concrete compressive strenght in existing structural frameworks.
Glock, C.; Sefrin, R.
BFT Internationl (2020), Heft 2, 2020, Gütersloh, Bauverlag GmbH, 2020, S. 133. - Development of an effective automatic flood barrier - Innovative precast high-performance concrete components.
Glock, C., Maryamh, K.
BFT International (2020), Heft 2, 2020, Gütersloh: Bauverlag GmbH, 2020, S. 97 - 98. - Aufschwimmen und Sperren - Selbsttätige Betonfertigteil-Hochwassersperre aus UHPFRC.
Glock, C., Maryamh, K.
Beton-Bauteile - Entwerfen Planen Ausführen 2021, 69. Auflage. Gütersloh: Bauverlag BV GmbH, 2020, S. 168 - 175
2019
Literaturliste
a) Arbeiten, die in Publikationsorganen mit einer wissenschaftlichen Qualitätssicherung erschienen sind
Literaturliste
- Ausreißertests bei der Bestimmung der In-situ-Betondruckfestigkeit.
Beton – Fachzeitschrift für Bau+Technik, Vol. 69, Nr. 6 (Juni), S. 212–219. (2019) - Auszugtragfähigkeit von GFK-Sandwichankern in gerissenem Normalbeton.
Carstens u. Pahn 2019, Nr. 4, S. 42–49. (2019) - Behaviour of thin puzzle-shaped composite dowels in multi-layer wall elements.
Proceedings of the fib Symposium 2019, S. 1259–1266. (2019) - Degradation Behaviour of GFRP Bars in Highly Alkaline Water-saturated Concrete under Sustained Load.
Conference Proceedings of ACIC Advanced Composites in Construction Conference, S. 39–44. (2019) - Durability of GFRP Bars with Different Bar Diameters.
Report of the IABSE Symposium Guimarães 2019 - Towards a Resilient Built Environment Risk and Asset Management, S. 603–610. (2019) - Economic and ecological sustainability of the thermal building envelope: a cross-European perspective.
4th Central European Symposium on Building Physics (CESBP 2019), Vol. 03.-05.09. Prague, (2019) - Effect of small concrete cover on the fatigue behavior of GFRP bar and concrete bond.
Journal of Composites for Construction (ASCE), Vol. 23, Nr. 2, (2019) - Experimental Investigation on Bending Creep in Cracked UHPFRC.
Short Fibre Reinforced Cementitious Composites and Ceramics, S. 19–31. (2019) - Fire Tests on the Pre-cast Concrete Sandwich Walls with GFRP Connectors.
Report of the IABSE Symposium Guimarães 2019 - Towards a Resilient Built Environment Risk and Asset Management, S. 759–766. (2019) - Influence of the local bond stress distribution of FRP rebars on the anchorage in concrete.
Report of the IABSE Symposium Guimarães 2019 - Towards a Resilient Built Environment Risk and Asset Management, S. 884–890. (2019) - Pull-Out Capacity of GFRP Connectors in the Edge Area of Precast Concrete Sandwich Walls.
Report of the IABSE Symposium Guimarães 2019 - Towards a Resilient Built Environment Risk and Asset Management, S. 1282–1288. (2019) - Recycled sands and aggregates in cement and precast concrete – a step towards circular economy in the construction sector.
Concrete – The magazine of concrete society, Vol. 53, Nr. 6 (July), S. 38–40. (2019) - Stabförmige Verbindungsmittel aus faserverstärktem Kunststoff für mehrschichtige Wandelemente.
Erläuterungen zu DIN EN 1992-4 Bemessung der Verankerung von Befestigungen in Beton, S. 115–125. (2019) - Zur Ermittlung von Zwangschnittgrößen in einachsig gespannten Hochbaudecken.
Beton- und Stahlbetonbau, Vol. 114, Nr. 9, S. 610–619. (2019)
- Abschlussbericht zum Forschungsprojekt: Sandwichtragwirkung von kerngedämmten Fertigteilwandtafeln unter Brandbeanspruchung, Aktenzeichen: SWD-10.08.18.7-17.25.
(2019-07-31) - A unified multiscale modelling approach for concrete fatigue with microscale damage-mechanism implementations.
Proceedings in Applied Mathematics and Mechanics, Vol. 19, S. . (2019) - Auszugtragfähigkeit von GFK-Sandwichankern in gerissenem Normalbeton.
Carstens u. Pahn 2019, Nr. 4, S. 42–49. (2019) - Bericht zum EU-Forschungsprojekt SeRaMCo – Innovative vorgefertigte Betonbauteile aus Sekundärrohstoffen.
BFT International, Nr. 2, S. 14–15. (2019) - Digitalisierung von Bestandsbauwerken.
Vorträge zum Deutschen Bautechnik-Tag, Vol. 45, S. 137–138. (2019) - Experimentelle und numerische Untersuchungen an Sandwichwänden unter vertikaler Lastbeanspruchung.
Vorträge zum Deutschen Bautechnik-Tag, S. 23–24. (2019) - Großdemonstrator - Multifunktionale Betonfertigteile für energetisch nutzbare Gebäudetragstrukturen. Abschlussbericht. Abschlussbericht Forschungsinitiative Zukunft Bau.
Stuttgart, Fraunhofer IRB Verlag (2019)
Adresse im Internet - New assessment of horizontal fresh concrete pressure. Neue Bewertung des horizontalen Frischbetondrucks.
Schmitt u. Pahn 2019, Nr. 02, S. 61. (2019) - Report on the SeRaMCo EU research project – Innovative precast elements made from secondary raw materials.
BFT International, Nr. 2, S. 14–15. (2019)
2018
a) Arbeiten, die in Publikationsorganen mit einer wissenschaftlichen Qualitätssicherung erschienen sindLiteraturliste
- Correlation between compressive and tensile strength of old concretes: Applicability of the relationship described in EN 1992‐1‐1.
Structural Concrete, Vol. 20, Nr. 2, S. 1–10. (2019) - Das neue fib Bulletin 80 – Teilsicherheitsbeiwerte für die Nachrechnung bestehender Massivbauwerke.
Beton- und Stahlbetonbau, Vol. 113, Nr. 4, S. 264–274. (2018) - Digitalisierung im Bauwesen (Editorial).
Beton- und Stahlbetonbau, Vol. 113, Nr. 5, S. 329. (2018) - Digitalisierung im konstruktiven Bauwesen.
Beton- und Stahlbetonbau, Vol. 113, Nr. 8, S. 614–622. (2018) - Elementwände mit integriertem Dämmstoff – Realitätsnahes Modell zur Berechnung des Frischbetondrucks.
Beton- und Stahlbetonbau, Vol. 114, S. 43–52. (2018) - Experimental study on cracking behavior of glass-FRP reinforced precast concrete sandwich panels.
Proceedings of the 12th International Conference on Sandwich Structures ICSS-12, S. 146–148. (2018) - Green cement and precast concrete will compete with conventional materials in the built environment.
CPI Concrete Plant International, Nr. 5, S. 32–34. (2018) - Große Stabdurchmesser und hohe Bewehrungsgrade – Teil 2: Rissbreitenbeschränkung und erforderliche Oberflächenbewehrung.
Beton- und Stahlbetonbau, Vol. 113, Nr. 11, S. 781–788. (2018) - Konstruktion und Bemessung selbststätiger Hochwassersperren aus Hochleistungsbeton.
Beton- und Stahlbetonbau, Vol. 113, Nr. 6, S. 423–432. (2018) - Micromechanical behavior of high performance concrete under cyclic loading at various moisture and thermal conditions.
Proceedings in Applied Mathematics and Mechanics, Vol. 18, (2018) - Thermo-mechanical response of concrete sandwich panels reinforced with glass fiber reinforced polymer bars.
Structural Concrete, Vol. 19, Nr. 3, S. 839–850. (2018)
DOI: 10.1002/suco.201700048
Adresse im Internet - Wärmespeicherung in der Gebäudestruktur – Umsetzung eines Großdemonstrators.
BauSIM2018 – 7. Deutsch-Österreichische IBSPA-Konferenz Tagungsband, S. 278–285. (2018) - Zugtragfähigkeit von Gewindebolzen unter Brandbeanspruchung.
Tagungsband des 21. DASt Forschungskolloquiums, S. 128–130. (2018)
- "Grüner" Zement und Betonfertigteile konkurrieren mit herkömmlichen Baustoffen.
BetonWerk International, Nr. 5 (Oktober), S. 32–34. (2018) - A concrete solar collector – From design to assembly in full scale.
VGB PowerTech Journal, Nr. 9, S. 42–48. (2018) - Development of a Concrete Parabolic Trough Collector.
Proceedings of the 2018 Solar Paces Conference, Vol. Casablanca, Morocco, (2018) - Digitalisierung im konstruktiven Bauwesen.
Vielfalt im Massivbau – Festschrift zum 65. Geburtstag von Prof. Dr.-Ing. Jürgen Schnell, S. 656–674. (2018) - Experimentelle Untersuchungen zum Einfluss von erhöhter Temperatur auf die Biegezugfestigkeit von (U)HPC.
Vielfalt im Massivbau – Festschrift zum 65. Geburtstag von Prof. Dr.-Ing. Jürgen Schnell, S. 527–541. (2018) - Forschungsvorhaben zur Bewertung der Tragfähigkeit von Injetkionsdübeln in Mauerwerk im Rahmen von Baustellenversuchen.
Mauerwerkskalender 2019, S. 413–429. (2018) - Multifunctional precast elements.
BFT-International, Vol. 84, Nr. 2, S. 32–33. (2018) - Neuartiges Verbundmittel für ein herstellungsoptimiertes Hochbau-Deckensystem.
(2018) - Tragverhalten von Verbunddübeln im Brandfall.
Vielfalt im Massivbau – Festschrift zum 65. Geburtstag von Prof. Dr.-Ing. Jürgen Schnell, S. 215–233. (2018) - Tragverhalten von Wandelementen mit dämmstoffintegrierten Schalungsankern.
BFT-International, Vol. 85, Nr. 8, S. 32–39. (2018) - Vielfalt im Massivbau – Festschrift zum 65. Geburtstag von Prof. Dr.-Ing. Jürgen Schnell.
Berlin, Ernst & Sohn Verlag (2018)
2017
a) Arbeiten, die in Publikationsorganen mit einer wissenschaftlichen Qualitätssicherung erschienen sindLiteraturliste
- Assisting Renewable Energy Integration by Price Based Load Shifting using Heat Pumps with Thermal Storage.
Proceedings of ETG Congress 2017 "Die Energiewende - Blueprint for the new energy age", (2017) - Befestigungen im Mauerwerk – Versuche am Bau.
Beiträge zur 5. DAfStb-Jahrestagung mit 58. Forschungskolloquium, (2017) - Computertomografie - den Fasern auf der Spur.
Bautechnik, Vol. 94, Nr. 10, S. 689–696. (2017) - Concrete cover effect on the bond of GFRP bar and concrete under static loading.
Composites Part B: Engineering, Vol. 124, S. 40–53. (2017) - Deckensystem mit Doppelverbundtechnik, Push-out Versuche an einem neuartigen Verbundmittel.
Beiträge zur 5. DAfStb-Jahrestagung mit 58. Forschungskolloquium, S. 12–21. (2017) - Detailing of reinforcement and particular rules in the course of time.
Current Scientific Challenges in Concrete and Steel Structures, 5. German – Polish PhD Symposium, S. 111–121. (2017) - Development and Construction of Light-Weight Curved Components made of High-Performance Concrete.
Current Scientific Challenges in Concrete and Steel Structures, 5. German – Polish PhD Symposium, S. 101–109. (2017) - Development and Construction of Light-Weight Parabolic Troughs made of High-Performance-Concrete.
Current Scientific Challenges in Concrete and Steel Structures, 5. German – Polish PhD Symposium, S. 123–133. (2017) - Die Keilzinkenverbindung als Fügetechnik im Stahlbetonbau.
Beiträge zur 5. DAfStb-Jahrestagung mit 58. Forschungskolloquium, S. 22–33. (2017) - Durability characteristic of GFRP bars under sustained load in different environments.
Current Scientific Challenges in Concrete and Steel Structures, 5. German – Polish PhD Symposium, S. 61–72. (2017) - Erfolgsfaktoren und Rahmenbedingungen von Wertschöpfungspartnerschaften für die Realisierung von Bauvorhaben - Eine empirische Analyse am Beispiel von Unternehmensimmobilien.
Bauingenieur, Vol. 2017, Nr. 2, S. 51–64. (2017) - Experimental investigation on the buckling capacity of sandwich wall panels with integrated columns under compression load.
Current Scientific Challenges in Concrete and Steel Structures, 5. German – Polish PhD Symposium, S. 27–34. (2017) - Flexural Behaviour of Thin GFRP-reinforced Concrete Slabs with Reduced Concrete Cover as a part of pre-cast Sandwich Panels.
Proceedings of the 8th Biennial Conference on Advanced Composites In Construction (ACIC-17), Vol. University of Sheffield, UK, S. 267–272. (2017) - GFRP Reinforcement and Anchorage Concepts for filigree Energy-Efficient Facades made of UHPC.
Powerskin Conference: Proceedings, Nr. International Congress Center München, Germany, 19th Januar, S. 202–211. (2017) - Hollow Core Concrete Shells for Large Aperture Parabolic Troughs.
High Tech Concrete: Where Technology and Engineering Meet. Proceedings of the 2017 fib Symposium, S. 1119–1127. (2017) - Long-term-performance of Loaded GFRP Bars in Alkaline Environment.
Proceedings of the 8th Biennial Conference on Advanced Composites In Construction (ACIC-17), S. 97–102. (2017) - Multi-level Optimisation of Parabolic Shells with Stiffeners Made from High-Performance Concrete.
High Tech Concrete: Where Technology and Engineering Meet. Proceedings of the 2017 fib Symposium, S. 2503–2511. (2017) - Neuer Ansatz zur Bestimmung des Schubmoduls für einen Dämmstoff.
Bauphysik 39, Vol. 39, Nr. 4, S. 253–260. (2017) - Optimised High-Performance Concrete Shells for Parabolic Trough Collectors.
Journal of the International Association for Shell and Spatial Structures, Vol. 58, Nr. 1, S. 105–119. (2017) - Qualification of bonded anchors in case of fire.
3rd International Symposium on Connections between Steel and Concrete, S. 1091–1099. (2017) - Sachstandbericht Bauen im Bestand - Teil II. Bestimmung charackteristischer Betondruckfestigkeiten und abgeleiteter Kenngrößen im Bestand.
1st ed.. Auflage, Berlin, Beuth Verlag (2017)
Adresse im Internet
Adresse im Internet - Smart Control of Heat Pumps and Thermal Storage Systems. An Approach to Support Future Distribution Grids.
Symposium Dublin, (2017) - Synergistic effects of alkaline environment on the behavior of GFRP bars under sustained load.
Proceedings of the Fifth International Conference on Durability of FRP Composite for Construction and Rehabilitation of Structures (CDCC-17), S. 95–102. (2017) - Tragverhalten von Verbunddübeln im Brandfall.
Beiträge zur 5. DAfStb-Jahrestagung mit 58. Forschungskolloquium, (2017) - UHPC Fassaden mit Verankerungs- und Bewehrungskonzepten aus GFK in mehrschichtigen Stahlbetonwandtafeln.
Beiträge zur 5. DAfStb-Jahrestagung mit 58. Forschungskolloquium, S. 46–56. (2017) - Zum Einfluss einzelner Traganteile auf die Querkrafttragfähigkeit von Stahlbetondecken mit integrierten Hohlräumen.
Beton- und Stahlbetonbau, Vol. 112, Nr. 3, S. 133–143. (2017) - Qualifizierung von Befestigungen im Mauerwerk im Brandfall.
(2016-09-20)
- Bestimmung charakteristischer Betondruckfestigkeiten und abgeleiteter Kenngrößen im Bestand. Neues DAfStb-Heft 619.
61. BetonTage Neu-Ulm, S. 81. (2017) - Bestimmung der charakteristischen Betondruckfestigkeit bei kleinem Stichprobenumfang.
Erhaltung von Bauwerken, S. 59–68. (2017) - Digitales Modell für den Immobilienlebenszyklus im Praxistest.
DBV-Heft, Vol. 40, S. 107–108. (2017) - Effizienz kybernetischer Sanierungskonzepte für 50er-Jahre Siedlungs-Wohnbauten. Am Beispiel der Siedlung "Am Germansberg" der Gemeinnützigen Baugenossenschaft Speyer e.G. : Abschlussbericht.
Freiburg im Breisgau, syntagma (2017)
Adresse im Internet - Einschätzung der Betondruck- und –zugfestigkeit an Bestandsbauwerken.
Neue Herausforderungen im Betonbau, S. 83–92. (2017) - GFRP bar and concrete bond under static and cyclic loading.
COST Action TU1207 End of Action Conference, (2017) - GFRP reinforced concrete sandwich panels thermos-mechanical behaviour.
COST Action TU1207 End of Action Conference, (2017) - Gebäude als thermische Batterien für das elektrische Netz – Einfluss der Wärmepumpengröße auf eine netzdienliche Betriebsweise.
Bauphysik in Forschung und Praxis, S. 37–40. (2017) - Korrelation der Druckfestigkeiten von Betonkernen aus Bauwerksbeton und genormten Probekörpern.
Beton – Herausforderungen in Forschung und Praxis, S. 376–388. (2017) - Multifunktionale Betonfertigteile – Großdemonstrator „Smallhouse IV“.
Bauphysik in Forschung und Praxis, S. 53–56. (2017) - Numerische Lösung des thermischen Verhaltens von Bauteilen mit PCM- und thermisch aktivierten Schichten.
Bauphysik in Forschung und Praxis, S. 57–59. (2017) - TAE Technische Akademie Esslingen, Tagungshandbuch 2017. 5. Kolloquium, 24. und 25. Januar 2017.
Ostfildern, Technische Akademie Esslingen (2017)
Adresse im Internet - Thin-walled precast concrete sandwich panels with GFRP reinforcement and connectors. Experimental and theoretical study.
COST Action TU1207 End of Action Conference, (2017) - Tragverhalten von Sandwichelementen mit dünnen Betonschalen und stiftförmigen Verbundmitteln. Neuartige Sandwichdachelemente.
61. BetonTage Neu-Ulm, S. 61. (2017)
2016
a) Arbeiten, die in Publikationsorganen mit einer wissenschaftlichen Qualitätssicherung erschienen sindLiteraturliste
- Partial factor methods for existing concrete structures. fib Bulletin No. 80, Recommendation.
Lausanne, Switzerland, Fédération internationale du betón (December 2016)
Adresse im Internet
Adresse im Internet - A new approach for calculating the internal forces, moments and deflections of sandwich panels with reinforced concrete facings.
Structural Concrete, Vol. 17, Nr. 2, S. 152–161. (2016) - Behaviour of cracked section of fibre reinforced UHPFRC under sustained load.
Creep behaviour in cracked sections of fibre reinforced concrete, (2016) - Bestimmung der charakteristischen Betondruckfestigkeit im Bestand bei kleinem Stichprobenumfang. Hintergründe und Erläuterungen zur Neuregelung nach E DIN EN 13791/A20.
Beton- und Stahlbetonbau, Vol. 111, Nr. 4, S. 188–199. (2016) - Design of light-weight, slender Parabolic Troughs made of High-Strength Concrete.
Proceedings of the 4th International Symposium on Ultra-High Performance Concrete and High Performance Construction Materials (HiPerMat), (2016) - Experimental Investigation of Flexural Behaviour of Thin Sandwich wall Panels Reinforced with GFRP rebars.
Proceedings of the Eighth International Conference on Fibre-Reinforced Polymer (FRP) Composites in Civil Engineering, S. 674–679. (2016) - Experimental Investigation of the Static and Fatigue Bond Behaviour of GFRP Bars and Concrete.
Proceedings of The 11th fib International PhD Symposium in Civil Engineering, S. 527–534. (2016) - Fertigteile zur multifunktionalen thermischen Nutzung.
Proceedings of the CESBP Central European Symposium on Building Physics and BauSIM, S. 449–456. (2016) - Houses as Thermal Batteries for the Electric Grid?.
Proceedings of the CESBP Central European Symposium on Building Physics and BauSIM 2016, S. 205–211. (2016) - Influence of the size effect on the flexural tensile strength of filigree UHPC components.
Proceedings of Young Researchers Symposium, S. 133–136. (2016) - Investigations on the size effect of thin structural elements made of UHPC.
Proceedings of the 4th International Symposium on Ultra-High Performance Concrete and High Performance Construction Materials (HiPerMat), S. 71–72. (2016) - Korrelation von Betondruck- und Zugfestigkeit historischer Betone. Bewertung der Anwendbarkeit bestehender Regeln nach DIN EN 1992-1-1.
Beton- und Stahlbetonbau, Vol. 111, Nr. 10, S. 635–644. (2016) - Load bearing and stability behaviour of concrete sandwich panels under compressive load.
Proceedings of the fib Symposium 2016, S. 387–388. (2016) - Mechanische Kennwerte für die Nachrechnung bestehender Massivbauwerke. Vorbereitung neuer Arbeitshilfen.
Bautechnik, Vol. 93, Nr. 1, S. 20–27. (2016) - Multi Axial Strain of Puzzle Bars in thin HPC Slabs.
Proceedings of the 4th International Symposium on Ultra-High Performance Concrete and High Performance Construction Materials (HiPerMat), (2016) - Multi Axial Strain of Puzzle Bars in thin HPC Slabs.
Proceedings of the 4th International Symposium on Ultra-High Performance Concrete and High Performance Construction Materials (HiPerMat), (2016) - New void formers for biaxial voided slabs.
Proceedings of the fib Symposium 2016, S. 181–182. (2016) - Numerische und experimentelle Untersuchung Thermisch aktivierter Sandwichwände mit integriertem Paraffin.
Proceedings of the CESBP Central European Symposium on Building Physics and BauSIM 2016, S. 457–464. (2016) - Parabolschalen aus Hochleistungsbeton als Solarkollektoren.
Beton- und Stahlbetonbau, Vol. 111, Nr. 12, S. 851–861. (2016) - Prädiktive Betriebsoptimierung drehzahlvariabler Wärmepumpen in Kombination mit preisvariablen Stromtarifen.
VDE Kongress, (2016) - Sachstandbericht Bauen im Bestand – Teil I. Mechanische Kennwerte historischer Betone, Betonstähle und Spannstähle für die Nachrechnung von bestehenden Bauwerken.
1.. Auflage, Berlin, Beuth-Verlag (2016) - Static and Fatigue Bond Behaviour of GFRP Bars and Concrete.
Proceedings of the Eighth International Conference on Fibre-Reinforced Polymer (FRP) Composites in Civil Engineering, S. 143–148. (2016) - Statistical simulations in connection with the estimation of the characteristic in-situ concrete compressive strength from small samples.
Proceedings of the fib Symposium 2016, S. 551–552. (2016) - Structural behavior of sandwich-roof panels with different distributions of bar-shaped connectors.
Proceedings of the fib Symposium 2016, S. 393–394. (2016) - Temperature Effects on Concrete Sandwich Panels Reinforced with Glass Fibre Reinforced Polymers (GFRP).
Proceedings of the Eighth International Conference on Fibre-Reinforced Polymer (FRP) Composites in Civil Engineering, S. 821–828. (2016) - Thermisch aktivierte Sandwichschwimmkörper für das Bauen auf dem Wasser.
Zukunftbauen - Forschungsinitiative Zukunft Bau 2016, S. 74–77. (2016)
- Partial factor methods for existing concrete structures. fib Bulletin No. 80, Recommendation.
Lausanne, Switzerland, Fédération internationale du betón (December 2016)
Adresse im Internet
Adresse im Internet - Praxisgerechtes Konstruieren und Bewehren am Beispiel.
Stahlbetonbau, S. D.1–D.44. (2017) - Besonderheiten bei der Nachrechnung von Bestandstragwerken in Stahlbetonbauweise – Bestimmung charakteristischer Materialkennwerte und Ansätze zur Modifikation von Teilsicherheitsbeiwerten.
Der Prüfingenieur, Vol. 48, S. 14–26. (2016) - Bestimmung charakteristischer Betondruckfestigkeiten im Bestand. Beurteilung bei geringem Stichprobenumfang.
60. BetonTage Neu-Ulm, S. 177–179. (2016) - Faserbetonplatten unter Brandbeanspruchung. Neue Erkenntnisse zu Wärmetransport und Tragfähigkeit.
60. BetonTage Neu-Ulm, (2016) - Hochleistungsbetonfassade mit energieeffizienter Verankerung.
60. BetonTage Neu-Ulm, S. 102–103. (2016) - Hohlkörperdecken.
Betonkalender 2017, S. 521–549. (2016) - Mechanische Kennwerte für die Nachrechnung bestehender Massivbauwerke. Vorbereitung neuer Arbeitshilfen.
Bautechnik, Vol. 93, Nr. 1, S. 20–27. (2016) - Mechanische Kennwerte historischer Baustoffe für die Nachrechnung bestehender Tragwerke.
3. Grazer Betonkolloquium, S. 25–37. (2016) - Sachstandbericht Bauen im Bestand – Teil I. Mechanische Kennwerte historischer Betone, Betonstähle und Spannstähle für die Nachrechnung von bestehenden Bauwerken.
1.. Auflage, Berlin, Beuth-Verlag (2016) - Stahlbetondecken mit integrierten Hohlräumen - Quertragfähigkeit unter Längszug.
60. BetonTage Neu-Ulm, S. 109–111. (2016) - Topologische Optimierung von Betonstrukturen.
Festschrift zu Ehren von Prof. Dr.-Ing. Dr.-Ing. E.h. Manfred Curbach, S. 234–255. (2016) - Tragverhalten schlanker Sandwichwände unter Vertikallast – Statische Mitwirkung der Vorsatzschale und Kernschicht.
60. BetonTage Neu-Ulm, S. 104–106. (2016) - Untersuchungen zur Korrelation von Druck- und Zugfestigkeit in alten, niederfesten Betonen als Grundlage für die Bestimmung der Tragfähigkeit von z. B. Befestigungsmitteln.
Abschlussbericht zum BBR-Forschungsauftrag, Vol. Aktenzeichen II 3-F20-12-1-005 / SWD-10.08.18.7-13.01, TU Kaiserslautern, (2016)
